Setting The Dolby Digital - Sharp DV-NC60W Operation Manual

DVD Setup
2
Use ' or " to select the "
3
Press ENTER and then use ' or " to select "COMPRESSION".
4
Press ENTER to display the settings you can select.
5
Use ' or " to select "ON" or "OFF".
• Use of the "OFF" setting is recommended when the Unit is
connected to audio equipment.
6
Press ENTER to confirm the setting.
• When you have completed the above setting, press RETURN
to exit the SETUP screen. However, if you want to specify the
"
• Whenever the "COMPRESSION" setting is "ON", VIRTUAL Dolby setting is
automatically changed to "OFF".

Setting the DOLBY DIGITAL

When playing a disc recorded using Dolby Digital (5.1ch)/MPEG
Audio (5.1ch), you can specify either "BITSTREAM" or "D-PCM"/
"PCM" as the digital type output.
• Before setting the "
45 and 46.
1
Press ENTER and then use ' or " to select "
2
Press ENTER to display the settings you can select.
46
GB
DVNC60W(E)#039_047.pm6
Downloaded from: http://www.usersmanualguide.com/
AUDIO SETUP".
AUDIO SETUP
COMPRESSION:
DIGITAL: BITSTREAM
MPEG: BITSTREAM
AUDIO SETUP
COMPRESSION:
DIGITAL:
MPEG:
DIGITAL" setting in succession, proceed to step 1 below.
DIGITAL" , perform the step 1 to 2 on pages
AUDIO SETUP
COMPRESSION:
DIGITAL: BITSTREAM
MPEG: BITSTREAM
46
OFF
OFF
ON
OFF
DIGITAL".
ON
D-PCM
TIMER
OPERATE
G-CODE
EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
OPEN/
FUNCTION PROG/
ZOOM
CONTROL REPEAT CLOSE
TITLE
DVD MENU
CLEAR SET
RETURN ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
AM/PM INPUT SELECT VCR DVD
/
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SPEED SKIP SLOW
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
01.10.11, 9:25 am