Auto Tuning System - Sharp DV-NC60W Operation Manual

Auto Tuning System

This Unit is equipped with an Auto Tuning System to provide easier
set up of the Unit. After following the instructions for "Basic
Connection" on pages 14 and 15 and "Adjusting the Video Channel"
on page 18, turn on your TV, press OPERATE to turn on the Unit,
and select the video channel. The Unit will automatically display the
setting screens as shown below.
LANGUAGE
Press SET. (Manual operation)
SYSTEM
Press SET. (Manual operation)
AUTOMATIC TUNING
Press VCR MENU to cancel the next step.
CLOCK
Press SET. (Manual operation)
Normal screen appears.
• If the Language selection and Auto Tuning have already been
performed, the Clock setting screen will first appear. To reset all VCR
settings and perform the Auto Tuning from the Language setting
screen, see page 35. (Perform "VCR-RESET")
20
GB
DVNC60W(E)#014_020.pm6
Downloaded from: http://www.usersmanualguide.com/
Selection of language to be used for
setting screen
the On Screen Display. (See page 35.)
Selection of broadcast system(SYSTEM)
setting screen
(I, B/G, D/K or M) that correspond with your
area. (See page 26, step 3.)
Setting and sorting the channels for your
screen
area. (See page 26.)
Setting the present time. (See page 33.)
setting screen
20
TIMER
OPERATE
G-CODE EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
FUNCTION PROG/ OPEN/
ZOOM
CONTROL REPEAT CLOSE
TITLE
DVD MENU
CLEAR SET
RETURN ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
AM/PM INPUT SELECT VCR DVD
/
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
01.10.11, 9:19 am