Preparing To Use The Dvd; Preparing To Use The Dvd; When Connecting A Tv With The Dvd; Output Jacks - Sharp DV-NC65S Instruction Manual

Preparing to Use The DVD

The following steps are necessary to display the DVD screen on the
TV.
When connecting a TV with the DVD output
jacks
1
Turn on the TV and switch the TV channel to the external input
"VIDEO" or "AV" channel connected to the DVD output jack.
2
Press OPERATE.
• The start up screen is displayed on the TV screen.
3
Move the VCR/DVD CHANGE Switch on the remote control to
DVD.
• When the TV is connected to the DVD output jack, the image will be
displayed regardless of the VCR/DVD mode selected. Therefore, it is
not necessary to adjust the mode selected.

When connecting a TV with the DVD/VCR

shared output jacks

1
Turn on the TV and switch the TV channel to the external input
"VIDEO" or "AV" channel connected to the DVD/VCR shared
output jack.
2
Press OPERATE.
3
Move VCR/DVD CHANGE Switch on the remote control to DVD.
4
Press VCR/DVD SELECTOR to enter the DVD mode.
• The VCR/DVD SELECTOR on the product lights up in green.
• Each time VCR/DVD SELECTOR is pressed, the mode
changes between "VCR" mode and "DVD" mode.
GB-74
DVNC65SE074_080.pm6
Downloaded from: http://www.usersmanualguide.com/
VCR DVD
VCR DVD
Lights up in green
VCR/DVD
SELECTOR
74
DV-NC65
PAL
OPERATE EJECT/STOP REW PLAY/X2
/ REC
CH VCR/DVD
SELECTOR
AV 2 IN VDEO VCR DVD
LINE IN 3 VIDEO L - AUDIO - R
OPERATE
VCR / DVD Selector
TIMER
OPERATE
SHOWVIEW
EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
OPEN/
FUNCTION PROG/
ANGLE
CONTROL REPEAT CLOSE
TITLE
DVD MENU
CLEAR SET
RETURN ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
AM/PM INPUT SELECT VCR DVD
/
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SPEED SKIP SLOW
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
RRMCGA071WJSA
8/10/02, 9:43 am
DVD / CD PLAYER
PLAY STOP OPEN/CLOSE
TIMER