Dvd Audio Connections; Connecting A Tv Equipped With S-Video Input Jacks; Connecting To Audio Equipment; Playing 2 Channel Audio - Sharp DV-NC60W Operation Manual

DVD Audio Connections

Connecting a TV Equipped with S-VIDEO Input Jacks

When you want to achieve a better video image by connecting a TV equipped with an S-VIDEO input connector
to the Unit, you should use an S-VIDEO cable (commercially available) to connect the TV to the Unit.

Connecting to Audio Equipment

Connecting the Unit to audio equipment provides normal stereo sound plus powerful stereo sound enhanced
by Dolby Digital (5.1 channel), DTS, and MPEG Audio.

Playing 2 channel audio

■ Analogue Connection
To S-VIDEO
input jack
TV (with external input jacks)
If the Unit is set to OPERATE ON, the DVD signals will be output from the DVD OUT jacks at all times.
(The DVD signals will be output from the DVD OUT jacks also when using the VCR.)
16
GB
DVNC60W(E)#014_020.pm6
Downloaded from: http://www.usersmanualguide.com/
This Unit
S - VIDEO
INPUT
16
Required cables
AUDIO cable (commercially available)
White (L)
Red (R)
S-VIDEO cable (commercially available)
DVD
LINE OUT 2
COMPONENT
Y
OUTPUT
S-VIDEO
SELECTOR
C R
B
COMPONENT
S-VIDEO
C L
R
To S-VIDEO
S-VIDEO cable
OUT jack
(commercially available)
AUDIO cable
(commercially available)
To amplifier
audio input jacks
ANALOG INPUT
(White)
L
(Red)
R
Amplifier of stereo system, etc.
White (L)
Red (R)
To AUDIO
DVD/VCR VCR
OUT jacks
ANTENNA IN
LINE OUT 1 LINE IN 1
R R
DIGITAL
AUDIO AUDIO
AUDIO
(Red)
L L
RF OUT
AUDIO VIDEO VIDEO
(White)
Jack and Plug Colours
Audio Left: White
Audio Right: Red
01.10.11, 9:19 am