Zooming An Image - Sharp DV-NC60W Operation Manual

Playback
DVD DVD

Zooming an Image

1
While a disc is playing, press ZOOM.
• Each press of ZOOM cycles through the zoom settings in the
following sequence:
ZOOM 1 (1.2×) → ZOOM 2 (1.5×) → ZOOM 3 (2.0×) → Off.
• When playing a Pan & Scan disc while
the "TV MODE" setting on the "TV MODE SETUP" screen,
each press of ZOOM cycles through zoom settings in the
following sequence:
ZOOM 1 (1.2×) → ZOOM 2 (1.5×) → Off.
Note that all of the above zoom factors are approximate only.
• While an image is zoomed, you can use ', ", \ and | to
shift the view and display the part you want.
• The ZOOM indicator changes from white to red to let you know when
you are trying to perform an illegal shift of view. If you are already at
the far left side of the image, for example, the zoom indicator will
become red when you press \.
• An image may become distorted when zoomed.
• You can cancel the zoom operation by pressing ËSTOP, DVD MENU,
TITLE, FWDè, ÈREV or FUNCTION CONTROL.
• The setting screen is cleared automatically whenever you display a
DVD screen that enables you to change the scene by pressing ', ",
\ or |.
• 1.2×, 1.5× and 2.0× zoom are approximate magnification values only.
The actual image may be somewhat larger or smaller depending on
the recording system (NTSC or PAL) that was used to record the disc.
• Subtitle cannot be zoomed.
82
GB
DVNC60W(E)#078_084.pm6
Downloaded from: http://www.usersmanualguide.com/
4
Press '.
Press ZOOM.
Press \ .
82
is selected as
: 3 P S
Press |.
Press " .
01.10.11, 9:32 am
: 1
ZOOM
ZOOM indicator
TIMER
OPERATE
G-CODE EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
FUNCTION PROG/ OPEN/
ZOOM
CONTROL REPEAT CLOSE
TITLE
DVD MENU
CLEAR SET
RETURN ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
AM/PM INPUT SELECT VCR DVD
/
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION