Resume Function - Sharp DV-NC60W Operation Manual

Resume Function

This function enables you to resume the playback from the location
you specify.
1
Press ËSTOP at the desired point during playback.
• "RESUME" appears followed by "RESUME" on the screen.
• This Unit stores the location where you stopped.
2
Press ûPLAY to restart play.
• Play resumes from a point slightly before the point where it
was stopped.
• Press ûPLAY to resume disc play, if auto-playback starts
from the beginning of the disc when you reload the same disc
after removing it.
• The continued playback described here may not be possible on some
discs (such as discs that automatically start playing when the disc tray
closes).
• Resume playback is disabled on Audio CDs.
• After you press ËSTOP to stop playback, you can press ËSTOP
again to resume playback from the beginning of the disc.
This resume operation does not work in the following cases.
• If you press ËSTOP twice.
• If you press ËSTOP during auto-playback.
• If you remove a disc and then load another one.
DVNC60W(E)#097_099.pm6
Downloaded from: http://www.usersmanualguide.com/
DVD
DVD
DVD
RESUME
To CANCEL RESUME PLAY
PRESS STOP
99
TIMER
OPERATE
G-CODE EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
FUNCTION PROG/ OPEN/
ZOOM
CONTROL REPEAT CLOSE
TITLE
DVD MENU
CLEAR SET
RETURN ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
AM/PM INPUT SELECT VCR DVD
/
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SPEED SKIP SLOW
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
01.10.11, 9:38 am
99
GB