Setting Up Your Vcr/Dvd Combination; Connecting To A Tv Or A Stereo Tv; Connecting To A Tv Equipped With S-Video Input Jack - Sharp DV-NC100S Operation Manual

SETTING UP YOUR VCR/DVD COMBINATION

CAUTION:
• Be sure to turn off the VCR/DVD and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure to keep the VCR/DVD connection cables separate from the TV antenna cable when you install the VCR/DVD,
because it may cause electrical interference when you are watching television programmes.
• DTS audio cannot be produced with an analogue connection.

Connecting to a TV or a stereo TV

DVD
DIGITAL
AUDIO OUT AUDIO OUT
Scart cable
(commercially available)
To SCART
terminal
Connecting to a TV Equipped with S-VIDEO Input Jack (DVD only)
If your TV has no SCART input terminal but has an S-VIDEO input jack, use a commercially available S-VIDEO cable to con-
nect from the VCR/DVD to the TV.
To ANALOG
AUDIO OUT jacks
(commercially available)
To AUDIO input
jacks
• You will not be able to hear all of the sound being output by the VCR/DVD if you use the AUDIO cable (commercially avail-
able) to a monaural TV that has only one AUDIO input jack.
NOTES:
• Be sure that the colours of the jacks and plugs match up when connecting the cable.
• Connect the VCR/DVD directly to the TV. If you attempt to view video on a TV connected via a VCR, the copy protection
function will scramble the picture.
• If you want to listen to the audio through audio equipment, connect only the S-VIDEO cable to the TV.
• You will still need the scart cable or Round coaxial cable for VCR features. (S-VIDEO connection is available only in
DVD mode.)
ANALOG S-VIDEO
OUT
VCR AV2 (DECODER)
L
DVD/VCR AV1 (TV)
R
To EURO AV1
(TV) OUT terminal
Round coaxial cable
(TV)
DVD
DIGITAL ANALOG S-VIDEO
AUDIO OUT AUDIO OUT
(White)
L
R
(Red)
AUDIO cable
(White) (Red)
L R
AUDIO S-VIDEO
IN INPUT
TV (with external input jacks)
from Antenna
A E R I A L
R F O U T
To RF OUT
jack
(supplied)
To AERIAL
jack
OUT
VCR AV2 (DECODER)
DVD/VCR AV1 (TV)
To S-VIDEO
OUT jack
S-VIDEO cable
(commercially available)
To S-VIDEO
input jack
– 10 –
CAUTION:
• Connect the VCR/DVD directly to
the TV. Do not connect the
VCR/DVD to a VCR, then connect
the VCR to the TV. Copyright
protection in the VCR could distort
the picture playing on the
VCR/DVD.
VCR/DVD
TV
A E R I A L
R F OU T
VCR
EN