Auto Zero Back - Sharp DV-NC60W Operation Manual

Auto Zero Back

The zero-back function makes the cassette fast forward (or rewind)
to the previously set "0:00.00" point and stop there.
1
Make sure the counter is displayed, then press CLEAR on the
Remote at the point you wish to return and later "0:00.00" is
displayed.
2
Press ZERO BACK on the Remote. The Unit automatically
detects the direction of the "0:00.00" position and fast forwards
(or rewinds) the tape.
3
When the tape reaches the "0:00.00" position, the tape
automatically stops.
• The zero-back function does not operate during recording and fast
forward (or rewind). The function works during the playback, stop and
video search modes.
62
GB
DVNC60W(E)#054_063.pm6
Downloaded from: http://www.usersmanualguide.com/
62
TIMER
OPERATE
G-CODE EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
FUNCTION PROG/ OPEN/
ZOOM
CONTROL REPEAT CLOSE
TITLE
DVD MENU
CLEAR SET
RETURN ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
AM/PM INPUT SELECT VCR DVD
/
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
01.10.11, 9:29 am