Dvd Audio Connections; Connecting A Tv Equipped With S-Video Input Jacks; Connecting To Audio Equipment; Playing 2 Channel Audio - Sharp DV-NC70W Operation Manual

DVD Audio Connections

Connecting a TV Equipped with S-VIDEO Input Jacks

When you want to achieve a better video image by connecting a TV equipped with an S-VIDEO input connector
to the Product, you should use an S-VIDEO cable (commercially available) to connect the TV to the Product.

Connecting to Audio Equipment

Connecting the Product to audio equipment provides normal stereo sound plus powerful stereo sound en-
hanced by Dolby Digital (5.1 channel), DTS, and MPEG Audio.

Playing 2 channel audio

Analogue Connection
To S-VIDEO
input jack
S - VIDEO
INPUT
TV (with external input jacks)
If the Product is set to OPERATE ON, the DVD signals will be output from the DVD OUT jacks at all times.
(The DVD signals will be output from the DVD OUT jacks also when using the VCR.)
16
GB
This Product
S-VIDEO cable
(commercially available)
Required cables
AUDIO cable (commercially available)
White (L)
Red (R)
S-VIDEO cable (commercially available)
DVD OUT
LINE OUT 2
COMPONENT
DIGITAL
Y
AUDIO
(Red)
P S-VIDEO R
B
( C )
B
AUDIO
P
R
L
( C )
R
(White)
To S-VIDEO
OUT jack
AUDIO cable
(commercially available)
To amplifier
audio input jacks
ANALOG INPUT
(White)
L
(Red)
R
Amplifier of stereo system, etc.
White (L)
Red (R)
To AUDIO
OUT jacks
DVD/VCR VCR
ANTENNA IN
LINE OUT 1 LINE IN 1
R R
AUDIO AUDIO
L L RF OUT
VIDEO VIDEO
Jack and Plug Colours
Audio Left: White
Audio Right: Red