Cypress CY8CKIT-062-BLE Manual page 3

Note: If the dongle firmware is outdated, you will be alerted with an appropriate message. You must upgrade the firmware before
you can complete this step. Follow the instructions in the window to update the dongle firmware.
d. Select Configure Master Settings and then click Restore Defaults, as
e. Set the Duplicate Filter Policy = Disable duplicate filtering in the Master Configuration > Scan parameters
window. See Figure
www.cypress.com
Figure 1. CySmart BLE Dongle Selection
Figure 2. CySmart Master Settings Configuration
3.
Document No. 002-17647 Rev.**
BLE Indoor Positioning with PSoC 6 MCU with BLE Connectivity
Figure 2 shows. Then click OK.
3