Cypress CY8CKIT-062-BLE Manual
  1. Manuals
  2. Brands
  3. Cypress Manuals
  4. Computer Hardware
  5. CY8CKIT-062-BLE
  6. Manual

Cypress CY8CKIT-062-BLE Manual

Psoc 6 ble pioneer kit
Hide thumbs Also See for CY8CKIT-062-BLE:
Table of Contents

Advertisement

Quick Links

Download this manual
Please note that Cypress is an Infineon Technologies Company.
The document following this cover page is marked as "Cypress" document as this is the
company that originally developed the product. Please note that Infineon will continue
to offer the product to new and existing customers as part of the Infineon product
portfolio.
Continuity of document content
The fact that Infineon offers the following product as part of the Infineon product
portfolio does not lead to any changes to this document. Future revisions will occur
when appropriate, and any changes will be set out on the document history page.
Continuity of ordering part numbers
Infineon continues to support existing part numbers. Please continue to use the
ordering part numbers listed in the datasheet for ordering.
www.infineon.com
Arrow.com.
Downloaded from

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CY8CKIT-062-BLE and is the answer not in the manual?

Questions and answers

Related Manuals for Cypress CY8CKIT-062-BLE

Summary of Contents for Cypress CY8CKIT-062-BLE

  • Page 1 Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as “Cypress” document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio.
  • Page 2 CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide Document Number. 002-17040 Rev. *K Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 www.cypress.com Arrow.com. Downloaded from...
  • Page 3 High-Risk Device, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from any use of a Cypress product as a Critical Component in a High-Risk Device.

  • Page 4: Table Of Contents

    Schematics ........................43 Hardware Functional Description................43 A.2.1 PSoC 6 MCU (U1)..................43 A.2.2 PSoC 5LP (U2) ....................43 A.2.3 Serial Interconnection between PSoC 5LP and PSoC 6 MCU ......44 CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 5 A.3.3 CapSense Shield ...................54 A.3.4 CSH........................55 A.3.5 U.FL .......................55 A.3.6 LiPo Battery Charger..................56 A.3.7 Multiplexed GPIOs ..................56 Bill of Materials ......................57 Frequently Asked Questions..................57 Revision History CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 6: Safety And Regulatory Compliance Information

    Handling Boards CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit is sensitive to ESD. Hold the board only by its edges. After removing the board from its box, place it on a grounded, static-free surface. Use a conductive foam pad, if available.
  • Page 7 Japan (TELC). Additional regional regulatory agency approval may be required to operate these throughout the world. The CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit as shipped from the factory has been verified to meet with requirements for the following compliances: As a Class A compliant product meeting requirement for CE ■...
  • Page 8 Dans ce cas, le produit final doit être étiqueté dans un endroit visible par le texte suivant: “IC: 7922A-CY8CKIT062” “Contains IC: 7922A-CY8CKIT062” Japan (TELEC) CY8CKIT‐062‐BLE 005‐101696 CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 9: Introduction

    Introduction Thank you for your interest in the CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit. The PSoC 6 BLE Pioneer Kit enables you to evaluate and develop your applications using the PSoC 6 MCU with Bluetooth Low Energy (BLE) Connectivity (hereafter called “PSoC 6 MCU”).

  • Page 10: Board Details

    Introduction Figure 1-1. Kit Contents Inspect the contents of the kit; if you find any part missing, contact your nearest Cypress sales office for help: www.cypress.com/support. Board Details Figure 1-2 shows the Pioneer board that has the following features: PSoC 6 MCU with BLE connectivity ■...
  • Page 11 Introduction Figure 1-2. Pioneer Board CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 12 When V Prog2 selected, the regulator can be turned ON/OFF by the KitProg2. When the super-capacitor is selected, PSoC 6 MCU can turn the regulator ON/OFF. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 13 RFIO, Antenna – ECO IN – ECO OUT – XRES Reset – P0.0 WCO IN – P0.1 WCO OUT – P0.2 Arduino header J4.8, D7 – CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 14 KitProg2 I2C SCL P6.1 Arduino J3.9, SDA – Remove R114 to disconnect from KitProg2 I2C SDA KitProg2 I2C SDA P6.2 GPIO on non Arduino – header (J2.15) CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 15 R97 to connect to header (J20.5) P8.5 CapSense Silder2 Rx GPIO on non- Remove R47 to disconnect CapSense pad and Arduino header populate R105 to connect to header (J20.6) CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 16 Populate R8 to connect to J18, remove R5 and R7 to Arduino header disconnect from Flash and pull-up. (J18.7) P11.3 QSPI FLASH/ – FRAM DATA3 CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 17 GPIO on non- Connected to primary and secondary function by Arduino header default. Remove R16 to disconnect from LED. (J2.20) VREF SAR BYPASS, J3.8, – AREF CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 18 5 V, by providing a constant 3.3 V interface to the E-INK display A load switch that can be controlled by the board to toggle the E-INK display’s power. ■ Figure 1-4. E-INK Display Shield CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 19 Introduction Figure 1-5 shows the pinout of the E-INK display shield. Figure 1-5. E-INK Shield Pinout CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 20 J2.2 ADC1 THERM OUT P10[1] J2.3 ADC2 THERM OUT P10[2] J2.4 ADC3 THERM GND P10[3] J2.5 ADC4 PDM CLK P10[4] J2.6 ADC5 PDM DATA P10[5] CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 21: Psoc Creator

    Figure 1-6. PSoC Creator Features PSoC Creator also enables you to tap into an entire tool ecosystem with integrated compiler chains and production programmers for PSoC devices. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 22: Psoc Creator Code Examples

    System Reference Guide: Choose Help > System Reference Guide. This guide lists and ■ describes the system functions provided by PSoC Creator. Component Datasheets: Right-click a Component and select Open Datasheet. ■ CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 23: Getting Started

    Click the File icon and then click Open. Displays an equation: Times New Roman 2 + 2 = 4 Text in gray boxes Describes cautions or unique functionality of the product. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 24: Acronyms

    Pulse Density Modulation Positive Temperature Coefficient PSoC Programmable System-on-Chip Pulse Width Modulation Red Green Blue Successive Approximation Register Serial Peripheral Interface SRAM Serial Random Access Memory CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 25 Introduction Table 1-5. Acronyms Used in this Document (continued) Acronym Definition Serial Wire Debug UART Universal Asynchronous Receiver Transmitter Universal Serial Bus Watch Crystal Oscillator CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 26: Software Installation

    Internet. b. CY8CKIT-062-BLE Kit Only: This executable file installs only the kit contents, which include Kit code examples, hardware files, and user documents. This package can be used if all the software prerequisites (listed in step 5) are installed on your PC.
  • Page 27 PSoC Creator 4.2 installer automatically installs the following additional software: PSoC Programmer 3.27.0 Peripheral Driver Library 3.0.1 b. CySmart 1.2 SP1 or later, available for download separately at www.cypress.com/cysmart. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 28 7. Enter your contact information or select the check box Continue Without Contact Information. Click Finish to complete the CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit software installation. 8. After the installation is complete, the kit contents are available at the following location: <Install_Directory>\CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit...

  • Page 29: Kit Operation

    BREG Power Modes High Speed I/O Matrix, Smart I/O, Boundary Scan Active/Sleep LowePowerActive/Sleep DeepSleep 78x GPIO (6 of these are OVT) Hibernate IO Subsystem Backup CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 30 3.7V @800mAH battery  @100mA/1.5A Fixed resistor KitProg2 Control (No‐load) charger 3.7‐4.2V CCG3 charging  current control CCG3  VSYS 5.3V  (Buck Boost o/p) PSoC 6 Control 1.8V‐3.3V Super Cap VBACKUP VBACKUP  selection  PMIC Enable KitProg2 Control (DPDT) 1.8V‐3.3V (VAR) @300mA CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 31 Kit Operation The CY8CKIT-062-BLE Pioneer Kit comes with the PSoC 6 BLE Pioneer Board with the CY8CKIT-028-EPD E-INK display shield connected, as Figure 3-3 shows. Figure 3-3. PSoC 6 BLE Pioneer board and E-INK display shield Figure 3-4 shows the markup of the Pioneer board.
  • Page 32 4. Cypress EZ-PD™ CCG3 Type-C Port Controller with PD (CYPD3125-40LQXIT, U3): The Pio- neer Board includes a Cypress EZ-PD™ CCG3 USB Type-C Port controller with Power Delivery system. This EZ-PD™ CCG3 device is pre-programmed and can deliver power from a Type-C port to onboard header J16, while simultaneously charging a lithium-ion polymer battery con- nected to J15.
  • Page 33 28. Cypress 512-Mbit serial NOR flash memory (S25FL512SAGMFI011, U4): This kit features a Cypress NOR flash (S25FL512SAGMFI011) of 512 Mb capacity. The NOR Flash is connected to the serial memory interface (SMIF) of the PSoC 6 MCU. The NOR device can be used for both data and code memory with execute-in-place (XIP) support and encryption.
  • Page 34 ON/OFF is controlled by PSoC 6 MCU. 31. Cypress PSoC 6 MCU (CY8C6347BZI-BLD53, U1): This kit is designed to highlight the fea- tures of the PSoC 6 MCU. For details on PSoC 6 MCU pin mapping, see Table 1-2 on page 32.

  • Page 35: Cy8Ckit-028-Epd E-Ink Display Shield

    9. E-INK display I/O voltage translator (U2): This I/O level translator allows the board to operate at any voltage between 1.8 and 3.3 V by providing a constant 3.3 V interface to the E-INK display. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com.

  • Page 36: Kitprog2

    USB-UART bridge, and a USB-SPI bridge. KitProg2 also supports mass storage programming and CMSIS-DAP, and custom applications. A Cypress PSoC 5LP device is used to implement KitProg2 functionality. The KitProg2 is integrated in most PSoC development kits. For more details on the Kit-...

  • Page 37: Programming Using Psoc Programmer

    Figure 3-7. UART connection between KitProg2 and PSoC 6 UART KitProg2 PSoC 6 BLE UART_TX P5[0] P12[6] UART_RX P5[1] P12[7] UART_CTS P15[5] P5[2] UART_RTS P1[6] P5[3] CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 38: Usb-I2C Bridge

    Figure 3-9. SPI connection between KitProg2 and PSoC 6 KitProg2 PSoC 6 BLE SPI_MOSI P12[0] P15[1] SPI_MISO P12[1] P12[5] SPI_SCLK P15[2] P12[2] SPI_SSEL P15[3] P12[4] CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 39: Ezpd Ccg3 Type-C Power Delivery

    Kit Operation EZPD CCG3 Type-C Power Delivery The Pioneer board includes a Cypress EZ-PD CCG3 power delivery system. This EZ-PD™ CCG3 is pre-programmed and can deliver power from a Type-C port to onboard header J16 (known as the consumer path), while simultaneously charging a 3.7 V, lithium-ion polymer battery connected to J15.
  • Page 40 ** The table is valid only if Type-C cable is connected first and then VIN is applied. If VIN is applied first, consumer capability will be N/A. For more information on USB Type-C power delivery with CCG3 device, see the EZ-PD CCG3 web page. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 41: Code Examples

    1. Launch PSoC Creator from Start > All Programs > Cypress > PSoC Creator <version> > PSoC Creator <version>. 2. On the Start Page, click CY8CKIT-062-BLE under Start > Kits. A list of code examples appears, as shown in Figure 4-1.
  • Page 42 Figure 4-3. Connect Device from PSoC Creator and Program 9. After programming is successful, the code example is ready to use. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 43: Code Examples

    CE222046_BLE_Throughput_ This code example demonstrates how to maximize the BLE Measurement throughput on PSoC 6 MCU with Bluetooth Low Energy (BLE) Connectivity device. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 44: Appendix

    This section explains in detail the individual hardware blocks of the PSoC 6 BLE Pioneer board. A.2.1 PSoC 6 MCU (U1) PSoC 6 MCU is Cypress’ latest, ultra-low-power PSoC specifically designed for wearables and IoT products. PSoC 6 MCU is a true programmable embedded system-on-chip, integrating a 150-MHz ®...

  • Page 45: Serial Interconnection Between Psoc 5Lp And Psoc 6 Mcu

    Level Translator for SPI and UART flow control P5LP_VDD P6_VDD SPI_MOSI P12_0 SPI_SCLK P12_2 SPI_MISO P12_1 SPI_SSEL P5LP_SSEL_P12_4 UART_RTS P5_3 UART_CTS P5_2 P6_VDD No Load FXMA108BQX CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 46: Ez-Pd Ccg3 Power Delivery System

    Appendix A.2.4 EZ-PD CCG3 Power Delivery System Cypress EZ-PD CCG3 provides a complete solution ideal for power adapters, power banks, Type-C dongles, monitors, docks and notebooks. See EZPD CCG3 Type-C Power Delivery on page 38 more details of the power delivery system implementation in the Pioneer board.

  • Page 47: Power Supply System

    PSoC 6 MCU before turning OFF the regulator. For more details of the PSoC 6 MCU backup system and power supply, see the PSoC 6 BLE Technical Reference Manual. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com.
  • Page 48 Regulator adapter > PD power Main adapter, Regulator <12V 5V–12V Main Regulator Main (VTARG_IN) Regulator 3.2V–4.2V Battery Main Regulator 1.8V–3.3V JTAG/ (VTARG_ REF) CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 49 0.1uF No Load P5LP_VDD VCC_5V CL-SB-13B-01T R118 R115 4.7K 4.7K C111 0.1uF 49.9K KP_PMIC_EN_OUT DIGPOT_SCL Source DIGPOT_SDA POS1 1.8V POS2 3.3V POS3 Variable (1.8-3.3V) ISL95810UIU8Z-T CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 50: Expansion Connectors

    This header also brings out the PSoC 5LP programming pins and can be programmed using MiniProg3 and 5-pin programming connector. J7 is not populated by default. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 51: Capsense Circuit

    The Pioneer board also has two user controllable LEDs (LED8 and LED9) and an RGB LED (LED5) connected to PSoC 6 MCU pins for user applications. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 52: Push Buttons

    A.2.10 Cypress NOR Flash The Pioneer board has a Cypress NOR flash memory (S25FL512SAGMFI011) of 512 Mb capacity. The NOR Flash is connected to the serial memory interface (SMIF) of PSoC 6 MCU. The NOR device can be used for both data and code memory with execute-in-place (XIP) support and encryption.

  • Page 53: Cypress Ferroelectric Ram (F-Ram)

    The Pioneer board includes a 32-MHz ECO and a 32-KHz WCO for PSoC 6 BLE device. Figure A-8. Schematics of ECO and WCO ECO for BLE MHz Crystal KHz Crystal XTAL_I 22pF P0_1 32MHz ECS-320-8-36CKM-TR 32.768KHz ECS-.327-12.5-34B-TR XTAL_O 22pF P0_0 CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 54: Psoc 6 Ble Pioneer Board Rework

    3.3 V device if the external voltage exceeds absolute maximum limit of devices. For example, 3.6 V for PSoC 6 MCU device, see the respective device datasheet for absolute maximum voltage limits. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 55: Psoc 6 Mcu User Button (Sw2)

    Connecting the hatched pattern to shield instead of ground will also reduce parasitic capacitance of the sensors. Figure A-11. Schematics of CapSense Shield CapSense Shield No Load R138 0ohm P6_3 CAP_SH1 No Load SHIELD R137 0ohm P13_6 R144 0ohm CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 56: Csh

    P10.0 No Load P1.5 P10.1 P10.2 U.FL-R-SMT-1(10) P5.0 P10.3 1.2pF P5.1 P10.4 P5.2 P10.5 No Load P5.3 P10.6 P5.4 P5.5 P5.6 P11.0 P11.1 P11 2 CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 57: Lipo Battery Charger

    Some of the PSoC 6 MCU pins are multiplexed with onboard peripherals and are not connected to connectors or other secondary components by default. See the PSoC 6 pin mapping table for details on modification required to access these pins. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 58: Bill Of Materials

    5.2 V regulator takes priority and the same is given as an input to Cypress buck regulator (U6). LiPo battery voltage is used when all the above sources are absent. Output of Cypress buck regulator (U6) is ORed with supply voltage from the Program and debug header (J11), and higher voltage takes precedence.
  • Page 59 PSoC 6 is not meant to be operated at voltages more than 3.6 V. Powering PSoC 6 to more than 4 V will permanently damage the chip. You cannot drive IO system with > 3.6 V supply voltages. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com.
  • Page 60 5 V/9 V/12 V device that has a current requirement of less that 1 A may be used. Additionally, Cypress has its own USB Type-C evaluation Kit which can be used to evaluate the provider and consumer features and many more. Visit http://www.cypress.com/products/usb-...
  • Page 61 Ensure that device used in PSoC Creator is CY8C6347BZI-BLD53 20. Does the kit get powered when I power the kit from another Cypress Kit through the J1 header? Yes, VIN pin on J1 header is the supply input/output pin and can take up to 12 V.
  • Page 62 Remove R150 and connect the common pad between R150 and R149 to the positive terminal ❐ of super-capacitor (C52). Load external pull-down resistor R148. ❐ CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 63 Appendix Figure A-16 for details. Figure A-16. Rework required to use PMIC Control CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...

  • Page 64: Revision History

    Updated Code Examples chapter on page Updated “Using the Kit Code Examples” on page Updated Figure 4-1. Updated “Code Examples” on page Updated Table 4-1. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 65 Replaced “reworks” with “rework” in heading. Updated “Frequently Asked Questions” on page Replaced “re-works” with “rework” in all instances. 6225773 07/02/2018 Updated details (Document Properties) in File > File Info. CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide, Document Number. 002-17040 Rev. *K Arrow.com. Downloaded from...
  • Page 66 Updated “Hardware Functional Description” on page Updated “CapSense Circuit” on page Updated description. 6642215 08/26/2019 Updated Document Title to read as “CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit Guide”. Updated Appendix chapter on page Updated “Frequently Asked Questions” on page Updated description.

Table of Contents