Card Recording - Sharp VL-PD6H Operation Manual

71
VL-PD6H/070-074
Downloaded from: http://www.usersmanualguide.com/
SmartMedia Card Features
Recording

Card Recording

It is possible to take a still picture in the same
way as you do with a standard camera and
record that image on the SmartMedia card.
Media Selection switch
Power Zoom buttons
STILL button
Power
switch
REC START/STOP button
1
Insert a SmartMedia card in the
camcorder.
2
Remove the lens cap. Pull out the
viewfinder horizontally with your finger.
3
Set the Media Selection
switch to CARD.
4
Hold down the Lock button and set the
Power switch to CAMERA.
• The picture from the lens is now
displayed in the viewfinder.
Number of shots taken
AUTO
Lock button
Number of shots remaining
71
5
Press the Power Zoom buttons to frame
the subject as you desire.
6
Press the STILL button.
• A still image of the subject
is displayed.
• To cancel the displayed
image, press the STILL
button again.
7
Press the REC START/STOP button to
begin recording.
• The indicator flashes red while data is
being recorded on the SmartMedia card,
and returns to white when recording
completes.
AUTO
Notes:
• Recording under insufficient lighting may result
in blurred images. We recommend that you use
a tripod to record insufficiently illuminated
subjects.
• Recording under the light of a fluorescent,
mercury, or sodium lamp may cause flickering in
the image and, depending on the timing of the
shot, may result in changes to colour hue in the
image.
• "RECORDING TO MEMORY CARD" or
"RECORDING TO TAPE" will be displayed during
the recording of still images. This display
indicates whether the still image is being
recorded to a SmartMedia card or to tape. Set
the MEDIA DISP menu item to "OFF" in Card
Recording or Tape Recording mode if you do not
want this to be displayed.
CARD
Caution:
6 / 4 0 • Do not turn the power off while the
flashing in step 7.
01.4.24, 0:58 PM
CARD
6 / 4 0
RE C ORD I NG T O RE C ORD I NG T O
MEMORY CARD MEMORY CARD
indicator is