Selecting The Audio Playback Mode; Connecting To A Personal Computer (Still Image Transfer) - Sharp VL-PD6H Operation Manual

69
VL-PD6H/060-069
Downloaded from: http://www.usersmanualguide.com/
Advanced Features
Playback
Selecting the Audio Playback
Mode
You can select any of the following audio
playback modes.
Audio 1+2
• 12-bit recording in stereo (Audio 1 and Audio
2 channels)
• 16-bit recording in stereo (left and right
channels)
Audio 1
• 12-bit recording in stereo (Audio 1 channel
only)
• 16-bit recording in mono (left channel only)
Audio 2
• 12-bit recording in stereo (Audio 2 channel
only)
• 16-bit recording in mono (right channel only)
1
Play back a Mini DV cassette with
dubbed audio.
2
Press the MENU/DISPLAY button until
the menu screen appears.
3
Turn the SET-PUSH dial (Q) to select
"AUDIO", and then press the dial (W) to
select the desired audio playback mode.
- - - - - - - - - - - 2 - - - - - - - - - -
Q
P I C TURE E F F .
C AP TURE
MUL T I FRAME
W
AUD I O
REMOT E
END [ME NU / D I SP L AY ]
1 + 2
4
Press the MENU/DISPLAY button to
turn off the menu screen.
• The selected audio playback mode
indicator is displayed.
Audio playback
mode indicator
69
Note:
• The audio playback mode indicator, "AUDIO", is
displayed in different colours depending on the
recording mode (12- or 16-bit) used for the
recording being played back. A white display
indicates 12-bit recording mode, and a green
display, 16-bit recording mode.
Connecting to a Personal
Computer (Still Image
Transfer)
This camcorder can transfer still playback
images in Tape Playback mode or still images
in Tape Recording mode to a personal
computer by using the optional VR-PK100S
PixLab Video Capture Software.
MENU
PC COMMUNICATION
1
1 + 2
ON
*Included with the optional VR-PK100S PixLab Video
Capture Software.
Notes:
1 2
• Use Sharp PixLab Browser and PixLab TWAIN
(YUV) Module to transfer images to a personal
computer.
• Images with the following functions cannot be
transferred to a personal computer.
— Tape Playback mode: Playback Zoom, Picture
Effect Playback
AUDIO1 + 2
— Tape Recording mode: Digital Zoom, picture
effects
• Still images recorded on a SmartMedia card
cannot be directly transferred from the
camcorder to a computer. See page 90 for
transferring the data on a SmartMedia card to
your computer.
• For details, see the operation manual of the
optional PixLab Video Capture Software.
To RS-232C port
(D-sub 9-pin port)
RS-232C connecting
cable*
To PC COMMUNICATION
jack
01.4.24, 0:19 PM