Editing To Video Equipment With The Dv Terminal (Ieee1394) - Sharp VL-PD6H Operation Manual

VL-PD6H/060-069
Downloaded from: http://www.usersmanualguide.com/
Editing to Video Equipment
with the DV Terminal
(IEEE1394)
This camcorder enables you to perform digital
video editing, using the camcorder as the
playback source. Connect the camcorder to
video equipment with a DV terminal using a
commercially-available DV cable. A DV cable is
able to transfer all dubbing signals including
video and audio.
Recording
Video equipment
To DV terminal
with DV terminal
(commercially available)
Playback
To DV terminal
DV terminal
66
Cutting Unwanted Sequences
Perform "Cutting Unwanted Sequences" on
page 65, using the video equipment as the
recording source.
Notes:
• The DV terminal on the camcorder outputs the
normal playback signal regardless of use of
Playback Zoom or Picture Effect Playback.
• The camcorder can only be used as a signal
source, it cannot be used for recording external
video or audio signals (analogue or digital).
DV cable
01.4.24, 0:19 PM
66