If Downloading Recorded Data Fails - T&D TR-57DCi User Manual

If Downloading Recorded Data Fails

Check the following:
Is there enough memory left in the TR-57DCi for the data?
If there is not enough memory remaining, the message [Memory Full] will
appear and downloading will stop. Please save recorded data from the
TR-57DCi to your PC and delete unnecessary data from the TR-57DCi to make
space for downloading new data from the Data Logger.
- See p.41 for details about how to check for remaining memory capacity.
- See p.44 for details about deleting data.
Has Infrared Communication been set to "Forbid"?
If a target TR-7Ui or TR-5i Series Logger has not been set to "Permit" Infrared
Communication, it will be impossible to download recorded data via Infrared
Communication. Using the software "T&D Recorder for Windows" or
"Illuminance UV Recorder for Windows", make the necessary settings to permit
Infrared Communication, and try downloading again.
- The application for the TR-76Ui does not have a setting to enable or disable infrared
communication; Infrared communication is always enabled.
- For details about Infrared Communication Settings, see the Data Logger User's
Manual or the [Help] Menu in the supplied software.
31