T&D TR-57DCi User Manual page 29

[Immediate Start / Programmed Start]
After having completed the recording settings, make settings for recording start
date and time. First, make sure that the clock settings in the TR-57DCi are
correct (See p.20). Also, make sure to download all necessary recorded data
before executing any new recording start settings.
Immediate Start: Recording conditions will be transmitted to the Data Logger and
recording will start immediately.
Programmed Set the specific date and time for the Data Logger to start recording.
Start:
Programming the Date and Time to Start Recording
[Interval (Recording Interval)]
Select from one of the following 15 choices. Move the Operation Dial up and
down to choose the value, and press the dial to confirm it.
- 1, 2, 5, 10, 15, 20, or 30 seconds
- 1, 2, 5, 10, 15, 20, 30 or 60 minutes
* Recording interval settings cannot be made for event recording.
[Recording Mode]
Move the Operation Dial up and down to choose the recording mode, and
press the dial to confirm it.
One-Time :
Endless :
(1) Moving the Operation Dial up and down will
change the selection item of the display in the
order of month, day, year, hour, and minute.
By pressing the dial, the value for that item
will flash.
(2) Change the value by moving the dial up and
down. Press the dial again to set the selected
value and move to the next settings item.
Recording will stop when the storage capacity becomes
full.
Overwrite the oldest data when capacity is full.
27