T&D RTR-53 User Manual

Warranty
Customer's name:
Address:
Phone No.:
Dealer's name:
Address: Global Sensors
Phone No.:
P.O. Box 369
Guarantee period 12 months from date of purchase
Date of purchase
Mount Holly, NC 28120
Provisions for Free Repair
(704) 827-4331
1. If the unit does not work properly despite the fact that the customer used it
properly and in line with the User's Manual, the unit shall be repaired free (866) 402-8282
of charge through the distributor from which the unit was purchased.
(704) 827-4883 (FAX)
2. If the customer requests free repair because of trouble within the warranty
period, bring or send the unit along with the warranty to the dealer. A
service charge may be added if a repairperson must be sent out to the
place of use for repair.
info@global-sensors.com
3. If you have moved after purchasing, or the product was received as a gift,
or there are some difficulties contacting the shop from which you purchased
www.global-sensors.com
the unit, please contact us directly for service.
4. Free repair is not available in the following cases even though it is within
the warranty period:
1. Trouble or damage was caused by careless operation, natural disaster,
fire, public pollution, or use of a power source other than specified.
2. If repair, adjustment, disassembly or modification of the unit has been
carried out by a person other than a T&D authorized engineer.
3.Trouble or damage was caused by transportation, movement or dropping
of the unit after purchase.
4.Failure to submit the Warranty or failure to fill in all items required in the
Warranty.
5. The Warranty cannot be reissued.
This Warranty only promises customers free repair within the period and
conditions clarified in this Warranty. Therefore, the customer's legal rights
will not be limited by this Warranty. For further information on repair and
other service questions after the termination of the warranty period, contact
your dealer.
This is printed on 100% recycled paper.
Wireless Regulations
Notices about this User's Manual
Please read this manual carefully before using the product.
All rights of this User's Manual belong to T&D Corporation. It is prohibited to use,
duplicate and/or arrange a part or whole of this User's Manual without the
permission of T&D Corporation.
Please follow the safety precautions carefully. We cannot guarantee nor are we
responsible for safety if this product is used in any manner other than was
intended.
T&D Corporation accepts no responsibility for any malfunction of and/or trouble
with this product or with your computer that is caused by the improper handling of
this product and will deem such trouble or malfunction as falling outside the
conditions for free repair of the attached warranty.
T&D Corporation accepts no responsibility for any result or effects from using this
User's Manual.
Safety Precautions and Instructions
To prevent any loss or damage to our customers, other people and/or property, and to ensure the proper use of our products we ask that before using
our product you carefully read, understand and follow the safety rules and precautions for our products as outlined below.
Explanation of Warning Symbols
These entries are actions that absolutely under no
DANGER
circumstance should be taken. The taking of such an action
may cause serious personal physical damage or death.
These entries are actions that if taken may lead to physical
CAUTION
injury or damage to persons or things.
Do not take apart, repair or modify the main unit.
It may cause fire, electrocution or damage. Ask the shop where you
purchased the products or T&D Corporation to carry out any repairs.
If any smoke or strange smells are emitted from the unit, immediately
cease using it.
Continued use may cause fire, electrocution or damage.
Do not use any batteries other than those that are recommended. It
may cause fire or damage.
)
We are not responsible for any malfunction or trouble caused by the
)
use of our product or by any problem caused by the malfunction of
our unit. Please be fully aware of this before using our product.
This product has been designed for private or industrial use only.
It is not for use in situations where strict safety precautions are
necessary such as in connection with medical equipment whether
directly or indirectly.
Do not drop or expose the unit to strong impact.
Do not put your fingers or foreign matter into the sensor connection.
Battery terminals may provide insufficient contact due to age or
vibration. Please be careful not to lose data due to insufficient
contact.
Pay attention to water leakage or foreign objects entering into the
unit case as in the following cases.
The case was closed with dust, hair, etc., on the rubber packing or in the
groove for the packing.
The rubber packing becomes damaged. (In this case, please purchase
the optional maintenance set.)
The unit suffered from significant temperature change while wet.
Especially if the temperature change is from high to low.
Figures and illustrations in this manual may be slightly simplified and may differ
from the actual product.
On screen messages, figures or illustrations in this manual may vary slightly or
be simplified from the actual messages and product.
We sincerely hope that the contents of this manual are true and complete. If you
find any information to have been omitted, or if the information within is confusing
or mistaken please, contact your retailer or T&D Corporation.
Microsoft ® , Windows ® and WindowsNT ® are registered trademarks of Microsoft
Corporation USA and are binding in the USA and all other countries. Company
names and product names are trademarks or registered trademarks of each
company.
This User's Manual cannot be reissued, so please keep it in a safe place.
Please carefully read this User's Manual and Warranty.
Please carefully observe the following safety measures when using our
product.
Explanation of Picture Symbols
This symbol denotes an important warning or caution. Inside or near the
symbol will appear another symbol giving details.
(EX: stands for ELECTROCUTION)
This symbol denotes a forbidden action. Inside or near the symbol will
appear another symbol giving details.
(EX: stands for DO NOT TAKE APART)
This symbol denotes an action that you must take. Inside or near the
symbol will appear another symbol giving details.
(EX: stands for TAKE PLUG OUT OF SOCKET)
DANGER
If water or a foreign object enters the case, immediately cease using
it.
Store all batteries, sensors and Thermo Recorder units out of the
reach of children. It is dangerous to swallow batteries.
Please be careful when using in overly hot or cold environments,
touching the units may cause burns or frostbite.
The RTR-53 is a devices to measure temperature humidity. Do not
use this unit for any purpose other than temperature humidity
measurement.
CAUTION
Battery life depends on the measurement environment,
communication frequency, recording interval and battery quality.
Remove batteries from any unit that is not to be used for a long period
of time.
Batteries left in a unit not being used for a long time may leak and cause a
malfunction.
Do not use or store the unit in places such as listed below:
It may cause electrocution, fire or damage to the unit or to your
computer.
Areas exposed to direct sunlight
Areas exposed to water or high-pressure water flow.
Areas exposed to organic solvents and corrosive gas.
Areas exposed to strong magnetic fields
Areas exposed to static electricity.
Areas exposed to fire or overheating.
Areas exposed to excessive dust or smoke.
About the TR-3310, the standard temperature and humidity sensor for
RTR-53.
Use the sensor only within the measurable temperature and humidity
range (Temperature: 32.0 to 131.0 , Humidity: 10 to 95
The Temperature/Humidity sensor cable cannot be extended.
When the sensor is not used, put it in the attached plastic bag with a
drying agent and keep it in cool, dark place at 41 to 77
or less.
The replacement period for the standard sensor is 1 year. Replace it
when 1 year has passed after opening the bag.
RH)
and 30 RH