Before Using This Product - T&D TR-57DCi User Manual

Before Using this Product

Important Notes about the Installation Procedure
(for using USB communication)
In order to use a USB connection to communicate between the Unit
and a computer, it is necessary to install the software and the USB
device driver.
Before connecting the Unit to a computer with a USB communication
cable, it is necessary to fi rst install the software and the USB device
driver. If you connect the Unit to the computer before installing them,
the USB device driver may not be installed properly.
If you have connected the Unit to your computer before installing the
USB device driver, make sure to click the [Cancel] button in the Wizard
window when it pops up on the computer display. Then disconnect the
USB communication cable from the Unit.
For more details about the proper installation procedure, see the
Software User's Manual that accompanies "T&D Recorder for Win-
dows".
5