Leveling Equipment - Matrix 7 Series Owner's Manual

CA R DIO EQ UIPMENT
LEVELING EQUIPMENT: TREADMILLS
7 & 5 SERIES TREADMILLS
TOOLS NEEDED
• 8 mm Allen socket and ratcheting wrench
INSTRUCTIONS
1. On the right side of the treadmill, just in front of the rear foot, you will find two leveling shims. Remove one
or both (Fig. 1).
2. Turn the treadmill on its side. Loosen the two bolts holding the rear foot to the frame. Slide one or both
shims between the frame and the top of the foot (Fig. 2).
FIG. 1
ALL OTHER TREADMILLS
TOOLS NEEDED
• Medium-size adjustable wrench
INSTRUCTIONS
Start with the leveling feet all the way up (turn clockwise). If the treadmill is not level, once placed, adjust
the leveling feet by turning counterclockwise (Fig.3). Tighten the jam nut on the leveling feet with an
adjustable wrench.
FIG. 3
Revis i on Date: April 2 020
FIG. 2
4