Leveling The Bike - Matrix U3X-02 Service Manual

CHAPTER 10: BIKE SPECIFICATION AND ASSEMBLY GUIDE

10.5 LEVELING THE BIKE

STABILIZING THE MATRIX U3X-02 BIKE
After positioning the bike in its intended location, check its stability by attempting to shake it side to side. Shaking or wobbling indicates that
your bike needs to be leveled. Determine which leveler is not resting completely on the floor. Loosen the nut with one hand to allow the leveler
to rotate. Rotate the left or right leveler, and repeat the adjustment as necessary until the bike is stable. Lock the adjustment by tightening the
nut against the rear foot support.
55