Moving The Equipment; Leveling The Equipment; Proper Usage - Matrix CXV Manual

BEFORE YOU BEGIN
WARNING!
Our equipment is heavy, use care and additional help if necessary when moving. Failure to follow these instructions could result in injury.
ENGLISH

MOVING THE EQUIPMENT

Please use transport handle at base of frame
when moving equipment.
Do NOT try moving equipment by pushing
or pulling on the console as this may cause
damage to the product.

PROPER USAGE

1. Sit on the seat of the cycle facing the handlebars.
2. To determine proper seat position, place one foot on each pedal, located on either side of
the bike. Your knee should bend slightly at the furthest pedal position. You should be able
to pedal without locking your knees or shifting your weight from side to side.
3. If you need to adjust the seat height or fore-aft position, stand with feet on the floor,
removing all weight from seat. Adjust seat as required, then remount.
4. Adjust pedal straps to desired tightness.
5. Set the resistance or the preferred exercise program as desired. Use
your feet to rotate the pedals in a controlled manner.
6. To dismount from the cycle, follow the proper usage steps in reverse.
13

LEVELING THE EQUIPMENT

It is extremely important that the levelers are correctly
adjusted for proper operation. Turn leveling foot
clockwise to lower and counter-clockwise to raise unit.
Adjust each side as needed until the equipment is
level. An unbalanced unit may cause belt misalignment
or other issues. Use of a level is recommended.