Table of Contents
Advertisement
BEFORE YOU BEGIN
LOCATION
Place the equipment on a level and stable surface away from direct sunlight.
The intense UV light can cause discoloration on the plastics. Locate your
equipment in an area with cool temperatures and low humidity. Ensure a
minimum clearance width of 0.6 meters (24") on each side for access to and
passage around MATRIX equipment. Please note, 0.91 meters (36") is the ADA
recommended clearance width for individuals in wheelchairs. Do not place the
equipment in any area that will block any vent or air openings. The equipment
should not be located in a garage, covered patio, near water or outdoors.
WARNING!
Our equipment is heavy. To avoid injury and damage, use
care and additional help if necessary when moving.
MOVING
1
EQUIPMENT
2
LEVELING THE EQUIPMENT
It is extremely important that the levelers
are correctly adjusted for proper operation.
Use of a level is recommended.
3
Once you have placed the equipment where
you intend to use it, raise or lower one
or both of the adjustable levelers located
on the bottom-front of the frame.
TRAINING AREA
2.5 M
(98.4")
2.02 M
0.9 M
(79.3")
(35.2")
ADJUSTING THE RESISTANCE
The resistance is adjustable. There are 5 levels of
resistance, 5 being the highest. The resistance
also increases the faster the pedals are used.
FREE AREA
3.22 M
(126.7")
2.1 M
(82.5")
PROPER USAGE
Use the seat for easy entrance and exit
of the equipment. Be sure to tighten the
pedal straps before using the machine.
2.5 M
(98.4")
9
Advertisement
Table of Contents
