Sample Gas; Safety Notes; Electrical Safety; Grounding - Ametek 3050-AM User Manual

Safety Notes

WARNINGS, CAUTIONS, and NOTES contained in this manual emphasize critical instructions as
follows:
An operating procedure which, if not strictly observed, may result in personal injury or envi-
!
ronmental contamination.
WARNING
!
An operating procedure which, if not strictly observed, may result in damage to the equipment.
CAUTION

Important information that should not be overlooked.
NOTE

Electrical Safety

Hazardous voltages are present in the analyzer housings when power is applied to the system.
Always shut down power source(s) before performing maintenance or troubleshooting. Only a
qualified electrician should make electrical connections and ground checks.
Any use of the equipment in a manner not specified by the manufacturer may impair the safety
protection originally provided by the equipment.

Grounding

Instrument grounding is mandatory. Performance specifications and safety protection are void
if instrument is operated from an improperly grounded power source.

Verify ground continuity of all equipment before applying power.
NOTE

Sample Gas

Potential hazards of the sample gas should be taken into consideration before connecting the
!
sample to the analyzer. Personal protective equipment and proper ventilation should be used if
WARNING
sample gas is toxic, flammable, or corrosive. Check the sample line and all connections for leaks
before powering up. Consult plant safety personnel for appropriate exhaust venting guidelines
for specific sample gas type.
vi | 3050 AM Moisture Analyzer