Promac PBD-3069 Manual page 5

Metal lathe
Table of Contents

Advertisement

Available languages

Available languages

31. Remove loose items and unnecessary work pieces from
the area before starting the machine.
Familiarize yourself with the following safety notices used in this manual:
WARNING: This means that if precautions are not heeded, it may result in serious, or possibly even fatal, injury.
CAUTION: This means that if precautions are not heeded, it may result in minor injury and/or possible machine
damage.
WARNING:
These symbols below advise that you follow the correct safety procedures when using this machine.
Read and understand the entire user
manual before attempting assembly or
machine operation.
Always wear approved working outfit
Wear safety goggles.
Wear ear protection.
Always wear the approved working outfit
Wear safety shoes.
Remove tie, rings, watches, jewellery.
Roll up sleeves above elbows.
Remove all loose clothing and confine
long hair
Make all machine adjustments or
maintenance with the machine unplugged
from the power source.
32. Pull the mains plug if the machine is not in use.
33. Make sure the workpiece is securely clamped.
SAVE THESE INSTRUCTIONS
5
Any work piece stock extending the rear
end of the headstock must be covered
on its entire length. High danger of injury
Do not operate this machine under the
influence of drugs, alcohol or medication
Do not wear gloves while operating this
machine
Connection and repair work on the
electrical installation may be carried out by
a qualified electrician only.
Never reach into the machine while it is
operating or running down.

Advertisement

Table of Contents
loading

Table of Contents