LG MultiSITE CRC1 Series User Interface Manual page 40

CONFIGURATION SCREENS
Accessories – continued
Parameter
Dry Cont Enbl(41)
Dry cont. Auto(9)
CN_EXT Cnfg (52)
Out. Air – Vent (24)
Plasma Kit (20)
Grill Elev. Kit (23)
Refrig Leak Sns(29)
Cntrlr Occ Sensor
Cntrlr Min Occ On
40
Parameter Settings
Choices:
0 = "Default (0)"
1 = "Not Used (1)"
2 = "Enabled (2)"
3 = "Use CN_EXT (3)"
Default value = Default(0)
Choices: 0 = "Auto Off (0)", 1 = "Auto On (1)"
Default value = Disabled(0)
Choices:
0 = "Disable (0)"
1 = "On/Off (1)"
2 = "DryCntct (2)"
3 = "Stp1IDU (3)"
4 = Reserved
5 = "StpIDUs (5)"
Default value = Disabled(0)
Choices: 0 = "Disable (0)", 1 = "Enable (1)"
Default value = Disabled(0)
Choices: 0 = "Disable (0)", 1 = "Enable (1)"
Default value = Disabled(0)
Choices: 0 = "Disable (0)", 1 = "Enable (1)"
Default value = Disabled(0)
Choices: 0 = "Disable (0)" , 1 = "Enable (1)"
Default value = Disabled(0)
Choices: 0 = "Disable", 1 = "Enable"
Default value = Disabled(0)
Choices:
0 = "10 min (0)"
1 = "30 min (1)"
2 = "60 min (2)"
Default value = 10 min (0)
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Definition
Enables use of a dry contact through the
CN_CC connector of the IDU
Enables auto run feature when used in
conjunction with a simple dry contact
Configures how the onboard dry contact
(CN_EXT) will be used.
Visit www.lghvac.com/resources/ and filter
under White Papers and Controls for more
information on using the IDU onboard simple
dry contact.
Used to inform the IDU that a ventilation kit
is installed. Enabling this control enables a
related control on the More screen to control
ventilation.
Enables or disables the plasma purification
function. A plasma kit is required.
For cassette IDUs only when kit is installed.
Enables controls that allow lowering of the
grill to provide easy access to the filter.
Enables the refrigerant leak sensor
Enables or disables the occupancy sensor,
either onboard PIR sensor or Zigbee
sensor(s)
Time the controller will wait before the
occupancy status changes to unoccupied
when no motion is detected by the sensor