LG MultiSITE CRC1 Series User Interface Manual page 16

CONFIGURATION SCREENS
More Screens – continued
Press the right arrow button to display these screens. To adjust vane angle, user selects vane(s) by tapping
vane icon at the top of the screen, adjusts vane angle by using up/down arrows and then selects Apply button.
Note:
Vane fixed angle control for multi-vane systems occurs in pairs. Refer to the Vane Fixed Angle screen. If a 4-louver
device is identified, when the user chooses Vane 1 or Vane 3 control, the opposite vane (Vane 3 or Vane 1) will be
controlled at the same time. If Vane 2 or Vane 4 is selected, Vane 4 or Vane 2 will be controlled in lockstep with its
matching pair as well. The same control behavior holds for a 2-louver device.
Airflow Up / Down and
Airflow Left / Right con-
trols can both be "On" at
the same time. However,
when Airflow Circular
control is "On," both of
the other two controls will
be set to "Off."
Parameter
Airflow Up / Down
Airflow Left / Right
Airflow Circular
Apply
Reset
16
Vane Dire c t ion
A ir f low U p/D o w n
A ir f low Le f t/R ig h t
A ir f lo w C ir c u la r
Parameter Settings
Choices: 0 = "Off", 1 = "On"
Default value: Off
Choices: 0 = "Off", 1 = "On"
Default value: Off
Choices: 0 = "Off", 1 = "On"
Default value: Off
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
O ff(0 )
O ff(0 )
O ff(0 )
Selects the vane direction of the airflow, up and down
Selects the vane direction of the airflow, left and right
For 4-way cassette IDUs only. Selects circular vane
direction
Sends the vane angle selected with the up and down
arrow keys to the IDU
Sets all vane angles to the default position of "3"
Vane Fi xed Angl e
ALL
Apply
Reset
Definition