LG MultiSITE CRC1 Series User Interface Manual page 45

ZigBee Configuration – continued
Press the right arrow on the ZigBee Configuration screen to display the third page of the ZigBee Configuration screen.
Parameter
IEEE address
Win Delay
Win Interlock
3/3 Zigbee configuration
IEEE address
Win Interlock
Win Delay
Parameter Settings
The extended IEEE ZigBee node
address is used to identify the device on
the network.
Default value = 0x0000
Choices: 0 min (0), 0.5 min (1), 1 min
(2), 2 min (3), 5 min (4)
Default value = 0 min (0)
Choices: Disable (0), IDU Off/A (1), IDU
Off/M (2)
Default = Disable (0)
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
CONFIGURATION SCREENS
0x0000
Disable(0)
0 min(0)
Address of the Zigbee wireless card
Sets the duration to ignore status of Zigbee
window inputs
Provides the ability to interlock IDU operation with
status of a Zigbee window switch.
Setting control to "IDU Off/A" causes the IDU
to come back on automatically when window is
re-closed after opening. Setting control to "IDU
Off/M" requires the user to manually turn the IDU
back on from the controller once the window is
re-closed.
Only last 4 digits in
HEX displayed
Definition
45