Temperature Settings - LG MultiSITE CRC1 Series User Interface Manual

Temperature Settings

Press the Temperature Settings button on the Installer screen to display the Temperature Settings screen. Press the right
arrow button to display the second page of the Temperature Settings screen.
1/2 Temperature Setti ng s
Temp S ens Loc(4)
Set P oi nt P re c . ( 17 )
Si ng l e SP Deadband
Parameter
Temp Sens Loc (4)
Setpoint °C Prec. (17)
Single SP Deadband
Heat Therm(15)
Cool Therm(27)
RC(1)
1° C(1)
4° F(2)
Parameter Settings
1 = "RC" (1)", 2 = "IDU (2)", 3 = "2TH (3)"
Default value = RC(1)
1°C(0), 0.5°C(1)
Default value = 1°C(0)
1 = "2°F (1)" 5 = "10°F (5)"
2 = "4°F (2)" 6 = "12°F (6)"
3 = "6°F (3)" 7 = "14°F (7)"
4 = "8°F (4)"
Default value = Dual SP (when supported)
0 = "Default (0)"
1 = "8°F/12°F (1)"
2 = "4°F/8°F (2)"
3 = "-2°F/2°F (3)"
4 = "-1°F/1°F (4)"
Default value = Default(0)
0 = "1°F/-1°F (0)"
1 = "12°F/8°F (1)"
2 = "8°F/4°F (2)"
3 = "2°F/-2°F (3)"
Default value = 1°F/-1°F (0)
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
CONFIGURATION SCREENS
2 / 2 Te m pe r a t u r e S e t t i ng s
H e a t . T h e r m ( 1 5 )
C o o l . T h e r m ( 2 7 )
Selects between sensing temperature at the remote
controller RC(1), the indoor unit IDU(2), or both
sensors 2TH(3)
Chooses whether to display Celsius temperatures
with 0.5 degree resolution or not
Differential temperature between the heating
setpoint (the value chosen as your setpoint) and
cooling setpoint
Provides an adjustable band around the heating
setpoint through selectable heating thermal on/off
values
Provides an adjustable band around the cooling
setpoint through selectable cooling thermal on/off
values
4 °F /7° F ( 2)
2° F/- 2° F (3)
Definition
33