Indoor Temperature Display; Auto Swing - LG PQRCUCA0 Owners & Installation Manual

Indoor Temperature Display

PQRCUCA0
Defrost Preheat
FAN
MODE
SPEED

Auto Swing

PQRCUCA0
Defrost Preheat
FAN
MODE
SPEED
Out door
Room Temp
Out door
Room Temp
How to use the Mode Selection Button
1
When the fan speedbutton is pressed on the remote
controller for about 3 seconds, the indoor temperature
will be displayed for about 5 seconds, then goes back
to the previous screen.
• Indoor temperature display may differ according to
slide S/W1 setting on the remote controller.
❈ There would be some difference between actual
temperature you feel and room temperature of remote
controller , because the temperature of the position is
not uniform which the remote controller is located on.
1
You can use the Auto Swing Function by pressing both
temperature decreasing button and mode button for
three seconds.
2
If you want to concel the Auto Swing function, press
the temperature decreasing buttn and mode button
again for three second.
❈ Even though Auto Swing Function is working,
remote controller is not displayed.
Owner's & Installation Manual 17