Preparing For Use; Shipping And Packaging; Transport And Storage; Transport - Siemens 1FK7 Series Operating Instructions Manual

Synchronous motor
Hide thumbs Also See for 1FK7 Series:
Table of Contents

Advertisement

Preparing for use

4.1

Shipping and packaging

Checking the delivery for completeness
The drive systems are assembled on an individual basis. Upon receipt of the delivery, check
immediately whether the items delivered are in accordance with the accompanying
documents. Siemens will not accept any guarantee for claims relating to defects which are
submitted at a later date.
● Report any apparent transport damage to the company delivering the equipment
● Report any apparent defects/missing components to the appropriate Siemens office
A second rating plate is included in the scope of delivery and can be attached close to the
motor as an additional means of making the motor data available.
4.2

Transport and storage

4.2.1

Transport

Use suitable load suspension devices when transporting and installing the motor. Country-
specific regulations must be observed.
If the motor is not to be commissioned immediately following delivery, it must be stored in a
dry, dust-free room that is not susceptible to vibration (see the Chapter "Storage").
Danger during lifting and transport operations!
Improper handling, devices and equipment that are unsuitable or damaged can result in
personal injury and/or material damage.
Lifting devices, industrial trucks, and load suspension devices must comply with
requirements. Pay attention to the lifting capacity of the hoisting gear. Do not attach any
additional loads. To hoist the motor, use suitable cable-guidance or spreading equipment
(particularly if the motor is equipped with mounted assemblies). The weight of the motor is
specified on the rating plate (type plate). The motor must not be lifted or transported by
means of the power connector, signal connector, or at the Sensor Module. The motor can
fall down. This can result in serious physical injury or material damage to the motor up to
it's complete destruction.
Synchronous Motors 1FK7
Operating Instructions, 03/2011, 610.40700.40c
immediately.
immediately.
WARNING
4
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents