Maintenance
9.2 Repair
Note
Coupling element
When replacing the encoder, the coupling element must also be replaced.
Motors with DRIVE-CLiQ
NOTICE
Motor data (electronic rating plate)
You must ensure that the new encoder contains the correct motor data. If it does not, the
motor may move in an uncontrolled fashion, leading to considerable material damage.
You can purchase a preprogrammed encoder module from the Siemens Service Center by
quoting the relevant order number and serial number. If your encoder module is not
preprogrammed, it must be programmed with the correct motor data prior to use.
50
Synchronous Motors 1FK7
Operating Instructions, 03/2011, 610.40700.40c