Jetter AG
3 Product description
3.1 Design
3.2 Features
JX3-BN-EC User Manual
The JX3-BN-EC is a bus node that connects JX3 I/O modules with an EtherCAT
master. It is used to set up distributed I/O stations.
1
9
8
7
6
Fig. 1: Design
DIN rail latch
1
Backplane module
3
DIN rail release latch
5
Port X15:
7
®
EtherCAT
OUT
Status indication
9
■
Automatic addressing
■
CoE protocol (CAN application protocol over EtherCAT
■
Compliant with EtherCAT
■
Synchronous communication via Distributed Clocks (DC Sync)
■
Up to 32 expansion modules can be connected
■
LEDs indicate the state of communication and power supply
Housing
2
Connector X119:
4
Connector for JX3 I/O modules
Terminal X10:
6
Power supply
Port X14:
8
EtherCAT
®
Modular Device Profile (MDP)
Product description | 3
2
3
4
5
1
®
IN
®
)
8 / 92
®