Removing The Device From The Din Rail - Jetter JX3-BN-EC User Manual

Jetter AG

5.2 Removing the device from the DIN rail

JX3-BN-EC User Manual
The release latch lets you remove the device from the DIN rail.
1
Fig. 6: Removing the device from the DIN rail
DIN rail
1
Detail view
A
1. Disconnect the system from the power supply.
2. Remove the device from the mains.
3. Pry the release latch (2) downwards and pull the device off the DIN rail (1).
A
DIN rail release latch
2
Mechanical installation | 5
A
2
16 / 92