Safety; General Information; Purpose; Intended Use - Jetter JX3-BN-EC User Manual

Jetter AG

2 Safety

2.1 General information

2.2 Purpose

2.2.1 Intended use

SELV

2.2.2 Usage other than intended

Machinery Directive This device is no safety-related part as per Machinery Directive 2006/42/EC, and
JX3-BN-EC User Manual
At the time of placing on the market, this product corresponds to the current state
of the art and meets the recognized safety rules.
Besides this user manual, laws and regulations in the operator's country are rele-
vant to the operation of the product. The operator is responsible for complying
with the directives mentioned below:
■ Applicable legislation, rules, and regulations
■ Relevant accident prevention regulations
■ Accepted safety rules
■ EU directives and other country-specific regulations
This device is a gateway module between an EtherCAT
modules. It is used to set up distributed I/O stations.
Operate the device only in accordance with the intended conditions of use, and
within the limits set forth in the technical specifications.
Intended use of the product includes its operation in accordance with this man-
ual.
The operating voltage of this device is classified as Safety Extra Low Voltage and
is therefore not subject to the European Low Voltage Directive. The device may
only be operated from a SELV source.
This device must not be used in technical systems which to a high degree have
to be fail-safe.
must, therefore, not be used for safety-relevant applications. This device is NOT
intended for the purpose of personal safety, and must, therefore, not be used to
protect persons.
Safety | 2
®
master and JX3 I/O
6 / 92