Ports And Interfaces; Terminal X10 - Power Supply; 2-Pin Connector, Spring-Cage Technology - Jetter JX3-BN-EC User Manual

Jetter AG

6.2 Ports and interfaces

6.2.1 Terminal X10 - Power supply

Ports and inter-
faces
INFO
Pin assignment
DC24V
0V
6.2.1.1
JX3-BN-EC User Manual
Terminal X10 lets you connect the following interface signals:
■ Power supply of the bus node JX3-BN-EC
■ Power supply for connected JX3 peripheral modules if they are not supplied
by a separate JX3-PS1 power supply module.
Design
The power supply to the bus node JX3-BN-EC must be designed with a circuit of
class 2 according to EN 61131.
Pin Description
DC24V Supply voltage
0V Reference potential (GND)

2-pin connector, spring-cage technology

Category
Connector
Designation
Connector technology
Type
Connectible conductors
Outer diameter of the iso-
lation
AWG
Terminal range
Stripping length
Specification without wire end ferrules
Single conductor
Flexible conductor
Specification with wire end ferrules
Wire end ferrule without
sleeve
Wire end ferrule with
sleeve
Crimping tool
Tab. 10: Connector specification, 2-pin connector, spring-cage technology
Description
BU_02_E_BLZF_GE_RM3.5
Spring-cage connection
2-pin, contact spacing 3.5 m
2.90 mm max.
16 ... 28
0.13 ... 1.5 mm²
10 mm
H05(07) V-U
0.2 ... 1.5 mm²
H05(07) V-K
0.2 ... 1.5 mm²
0.2 ... 1.5 mm²
0.2 ... 1.5 mm²
PZ 4, PZ 6 ROTO, PZ 6/5 DIN 46228
Electrical connection | 6
Standards
DIN 46228/1
DIN 46228/4
20 / 92