Intel Terasic FLIK Manual page 23

Figure 3-13 System device in Device Manager
13. Open Command Prompt(CMD) in the Windows.
14. Go to the folder "C:\intelFPGA_pro\19.2\aclrte-windows64\board\dcp_bsp\bringup"
Note : If the path: "C:\IntelFPGA_pro\19.2\aclrte-windows64\board\ dcp_bsp\" does
not exist on the user's host PC, please copy the path form the OpenVINO BSP for
windows (path: \FLIK_OpenVINO2019R1_windows\OpenVINO2019R1_windows\
FLIK-Windows-Install_19.2 \ dcp_bsp) to the specified directory.
15. Execute "InitRuntimeEnv.bat"
FLIK Getting
Started Guide
Figure 3-14 run InitRuntimeEnv.bat
23
www.terasic.com
April 30, 2020