Using Headphones; General Device Functions; Switching On The Device - TechniSat DIGITRADIO 30 Instruction Manual

5.3.3

Using headphones

Hearing impairment!
Do not listen to the radio at high volume with headphones.
Doing so can cause permanent hearing impairment. Turn
down the radio volume to the lowest volume before using
headphones.
Only use headphones with a 3.5 mm jack plug.
> Insert the headphone plug into the headphone
jack on the rear of the device. Sound will now only
be heard via the headphones, and the speaker is
switched to mute.
> If you would like to use the speakers again, unplug
the headphones from the headphone jack on the
radio.
5.4

General device functions

5.4.1

Switching on the device

To ensure good DAB+ / FM reception, please note
Section 5.3.2.
> First prepare the DIGITRADIO 30 for operation as
described in Section 5.3.
> Push the On / Standby button on the top of the
unit to turn on the DIGITRADIO 30.
DE
EN
FR
NL
73