Using Headphones - TechniSat TECHNIRADIO 5 IR Instruction Manual

Do not place the device near to sources of heat, such as radiators. Avoid direct
sunlight and very dusty environments.
Please note that the device feet could leave coloured marks on some types of
furniture surfaces in certain situations. Place a protective layer between your
furniture and the device.
Keep the TECHNIRADIO 5 IR away from devices that emit intense magnetic
fields.
Do not place any heavy objects on the device.
Route the mains cable in such a way that nobody can trip over it.
Ensure that the mains cable or the power supply unit are always easily
accessible, so that the device can be quickly disconnected from the power
supply! The power outlet should be as close to the device as possible. Avoid
using multiple sockets!
In the case of malfunctions or detecting smoke or odour from the housing,
remove the plug from the power outlet immediately!

4.3.4 Using headphones

WARNING!
Hearing impairment! Do not listen to music at a high volume. Doing so can
cause permanent hearing impairment. Turn down the radio volume to the
lowest volume before using headphones.
Only use headphones with a 3.5mm stereo jack plug.
> Insert the headphone jack into the headphone socket on the back of the
device. Sound will now only be heard via the headphones, the speaker is
switched to mute.
> If you would like to use the speakers again, unplug the headphones from the
headphone jack on the radio.
DE
EN
NL
FR
PL
45