Sleep Timer; Alarm - TechniSat DIGITRADIO 30 Instruction Manual

10 Sleep timer

The sleep timer automatically switches the DIGITRADIO to
Standby (mains operation) or Off (battery power) after
the set time.
> Push the MENU button and select [Sleep] in the
submenu [System].
> Then select a period after which the DIGITRADIO
should switch off.
You can choose between Off, 10, 20, 30, 60, 70,
80 and 90 minutes.
If you would like to check the time left while the
sleep timer is active, just open the Menu > System
> Sleep again.
If you want to switch off an active sleep timer,
select the Off setting in this menu.

11 Alarm

The DIGITRADIO 30 has 2 alarms.
The alarm function can only be used when plugged
into the mains.
> Push the MENU button and select [Alarm] in the
submenu [System].
The wake-up function cannot be operated until
the correct time has been set. Depending on the
configuration, this occurs automatically or will need
to be set manually (Section 12.1.2).
DE
EN
FR
NL
87