Table of Contents
Advertisement
Q4
Other problems
Symptom
Cannot synchronize
the PJP-MC or PC
to an NTP server.
to the Web interface.
An incorrect time
is displayed.
Cannot log in on
CONSOLE Port
Cause
The NTP server IP address or
domain name is incorrect.
The route to the registered NTP
server has not been configured.
The time zone is not set
properly.
You are using a straight serial
cable.
The serial port settings are
incorrect.
Solution
• Check to make sure that the settings
match the NTP server information.
• Ping the NTP server to confirm that it is
functioning.
Check the provider and route settings.
Set the time zone according to the
PJP-MC24 location.
Use a cross serial cable.
Set to 9600 bps, 8 bits, 1 stop bit, and no
parity (page 75).
Advertisement
Table of Contents
