Table of Contents
Advertisement
Q2
When the Web Interface
is Not Working
Symptom
The Web interface
is inaccessible.
0
Cause
The PJP-MC24 does not
recognize the PC (The LINK
LED above the LAN port is not
lighted).
The PC network settings are
incorrect (other PCs and
printers on the LAN are not
functioning).
The PJP-MC24 is
malfunctioning.
The PJP-MC24 LAN Port IP
address has not been set.
Access to the Web interface is
blocked.
The port number has been
changed on the GUI Settings
window.
The specified URL is invalid.
The Web browser is
not configured to connect
via LAN.
Solution
See "The LINK LED at the LAN port does
not turn on" (page 78).
Reconfigure the LAN port and card
•
settings, and reboot the PC.
Reset the PC IP address.
•
Initialize the PJP-MC24 (page 84), and
reconfigure the settings.
If connecting to a PC through a LAN port,
•
set the LAN port IP address.
Properly configure the PC network
•
settings. When using DHCP, use
a separate DHCP server.
• If the IP address access limitation feature
is enabled, the following message will be
displayed when you try to connect from
an unauthorized host:
Error503
"This server is available to members
only. I'm sorry, your host is not member."
When using remote control, reconfigure
the GUI Settings.
• Connect to the PJP-MC24 using a PC
that has been granted access permission
or change the access settings on the
GUI Settings window.
Access by typing "http://(IP address):(port
number)/" (for example http://192.168.100.
101:80/) into your Web browser.
When using the PJP-MC24 for the first
time or after reverting it to the defaults,
access "http://192.168.100.101/."
If you are using Windows Internet Explorer
6: the connection settings are found in the
Connection tab under Internet Options.
If the connection method is set to dial-up,
the browser will not be able to access the
Web interface. Change the connection
setting to Never dial a connection.
Advertisement
Table of Contents
