Table of Contents
Advertisement
1
On the IP Settings page, click Add under IP Keepalive
The IP Keepalive Settings window opens.
2
Enter the ICMP Echo request target IP address in the Target IP
Address box.
Enter the IP address of a device whose connection you want to check (for example,
the default gateway IP address).
3
Specify the transmit interval and count in the Transmit Interval
and Transmit Count boxes as necessary.
Transmit Interval
You can specify the interval between ICMP Echo transmissions in seconds. If the PJP-
MC24 receives an ICMP Echo Reply before the next Echo request transmission, the
address passes. If no reply is received, the address fails.
Transmit Count
Sets the number of ICMP Echo request transmissions that will be sent. If the PJP-
MC24 does not receive an ICMP Echo reply for the number of transmissions set under
Transmit Count, the IP address is considered invalid.
4
Click Apply.
A confirmation window opens.
5
Click Close.
You will return to the IP Settings page.
0
.
Advertisement
Table of Contents
