Table of Contents
Advertisement
. Specify the CONSOLE
port and establish
connection.
Log in to the PJP-MC24 using the PC that is
connected to the CONSOLE port. Use console
commands to configure settings. The following
example uses Windows HyperTerminal.
1
On the task bar, click Start, point
to Programs > Accessories >
Communications, and click
HyperTerminal.
The Connection Description window
opens.
2
Enter the connection name in the Name
box.
You can enter any connection name.
3
Select the CONSOLE port number that
you identified in "2. Confirming the
CONSOLE Port Number" from Connect
Using and click OK.
The COMx Properties window opens.
4
Enter the following values.
• Bits per second: 9600
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: Xon/Xoff
5
Click OK
The HyperTerminal window opens.
Advertisement
Table of Contents
