Table of Contents
Advertisement
1
On the System Settings window, click Edit under Clock.
The Clock Settings window opens.
2
Click Change next to PJP-MC Date/Time.
3
Enter the date and time.
Tips
To set the time accurately, set a time slightly ahead of the current time, and then click the
Apply button just as that time is reached.
4
Set the time zone in the Timezone.
If you are in Japan, select +0:00.
5
Click Apply.
A confirmation window opens.
6
Click Close.
The System Settings window appears again.
For areas with daylight saving time
Select the Adjust clock for daylight saving changes check box, and then enter the
daylight saving starting and ending times. For more information, click the help icon on
the Clock Settings window.
Setting the time automatically
You can set the time automatically using an Internet NTP (Network Time Protocol)
server.
For more information, click the help icon on the Clock Settings window.
Note
The security settings of the LAN network that the PJP-MC24 is located on may not allow it to
use an NTP server to set the time. When using an external NTP server, please configure your
network equipment appropriately. Refer to your network equipment documentation for more
information.
Advertisement
Table of Contents
