Volatile Meter State - Upper (Register 036); Volatile Meter State - Lower (Register 037) - Landis+Gyr Cashpower Gem Lite User Manual

Information Functions
5.1.16 Volatile Meter State – Upper (Register 036)
The meter displays the most significant eight bits of the volatile meter state register. This register indicates the
current state of the following meter functions:
Display Function (bracketed state applies for a bit set to 0)
1xxx - - - -
Not Used
x1xx - - - -
Not used
xx1x - - - - Not used
xxx1 - - - -
Not used
Press „036‟ to toggle between UPPER set and LOWER sets of 4 numbers
- - - - 1xxx
Not used for field staff
- - - - x1xx Not used
- - - - xx1x
Reason for latch hold-back: Overload / Magnetic trip
- - - - xxx1
Not used for field staff
5.1.17 Volatile Meter State – Lower (Register 037)
The meter displays the least significant eight bits of the volatile meter state register. This register indicates the
current state of the following meter functions:
Display Function (bracketed state applies for a bit set to 0)
1xxx - - - -
Meter in Creep Lock (Out of Creep Lock)
x1xx - - - - Not used
xx1x - - - - Not used
xxx1 - - - -
Tamper switch not depressed (Tamper switch depressed)
Press „037‟ to toggle between UPPER set and LOWER sets of 4 numbers
- - - - 1xxx
Not Used
- - - - x1xx Not used
- - - - xx1x
DC Magnetic Field Detected (No DC Magnetic Field detected)
DC Magnetic Field Trip State – tripped due to magnetic field detection
- - - - xxx1
3
Because eight digits need to be displayed, but only 7 digits are available on the display, the number to be displayed is
grouped into two sets of four numbers each. The upper set is displayed on the left hand side of the display, whilst the lower
set is displayed on the right hand side. To toggle between the upper and lower sets, re-enter the three digit code for that
register (without pressing the information-key).
Cashpower Gem Lite – User Guide
Review
Volatile Meter State Register – Upper
Meter State Register – lower
3
25/27
© Landis+Gyr (Pty) Ltd