Meter State Register Upper (Register 030); Meter State Register Lower (Register 031) - Landis+Gyr Cashpower Gem Lite User Manual

Information Functions

5.1.12 Meter State Register UPPER (Register 030)

The meter displays the most significant eight bits of the meter state register. This register indicates the current
state of the following meter functions:
Display Function
1xxx - - - -
Not Used
x1xx - - - -
Not used
xx1x - - - - Not used
xxx1 - - - -
Not used
Press „030‟ to toggle between UPPER set and LOWER sets of 4 numbers
- - - - 1xxx
Not used
- - - - x1xx Not used
- - - - xx1x
Not used
- - - - xxx1
Waiting for Key press (if non-auto latching relay reconnect enabled)

5.1.13 Meter State Register LOWER (Register 031)

The meter displays the least significant eight bits of the meter state register. This register indicates the current
state of the following meter functions:
Display Function (bracketed state applies for a bit set to 0)
1xxx - - - -
Latching relay Inhibit (Latching relay not inhibited)
x1xx - - - -
Significant reverse power metered (SRE not metered / detected)
xx1x - - - - Not used
xxx1 - - - - Meter decommissioned (Meter Commissioned)
Press „031‟ to toggle between UPPER set and LOWER sets of 4 numbers
- - - 1xxx
Meter NOT initialised i.e. default key (Meter initialised)
- - - x1xx Meter in power limit trip (Meter NOT in power limit trip)
- - - xx1x Meter out of credit (Meter has sufficient credit)
- - - xxx1 Meter tampered (Meter NOT tampered)
1
Because eight digits need to be displayed, but only 7 digits are available on the display, the number to be displayed is
grouped into two sets of four numbers each. The upper set is displayed on the left hand side of the display, whilst the lower
set is displayed on the right hand side. To toggle between the upper and lower sets, re-enter the three digit code for that
register (without pressing the information-key).
Cashpower Gem Lite – User Guide
Review
Meter State Register – Upper
Meter State Register – Lower
1
23/27
© Landis+Gyr (Pty) Ltd