Basic Operation; Playback; Basic Procedure; Using The Scene Function - Yamaha AV RECEIVER RX-V1065 Owner's Manual

BASICOPERATION
1
Turn on external components (TV, DVD
player, etc.) connected to this unit.
2
Rotate the @INPUT selector (or press
[]Input selection key) to select an input
source.
The name of the selected input source is displayed for
a few seconds.
Input source name
["i :...;.L
_%,-_
• You can also select an input source from the GUI screen (page 23).
• You can change the input source name displayed on the front panel
display or GU1 screen as necessary (page 60).
Play the external component that you have
selected as the source input, or select a radio
station on the tuner.
Refer to the operating instructions of the external
component for details on playback. For selecting
radio stations or playback of an iPod, Bluetooth
component or USB storage device using this unit, see
the following.
* FM/AM radio tuning (page 29)
* iPod playback (page 42)
* Bluetooth component playback (page 44)
* USB storage device playback (page 45)
4
Turn the @VOLUME control (or press
[]VOLUME +/-) to adjust the volume.
Volume
.... IC_
ILl ' _,71 [
[ i .. "! ........ "i :': !:2" .it"= _ .....
.................................. .....
Note
When you play back a DTS-CD, noise may be output in some
conditions, which may cause a speaker malfunction. Make sure
that the volume is set to low before starting playback. If noise is
output, do the t_llowing.
1) When only noise is output
If a DTS bitstream signal is not properly input to this unit,
only noise is output. Connect the playback component to this
unit by digital connection and play back the DTS-CD. If the
condition is not improved, the problem may results fi'om the
playback component. Consult the manufacturer of the
playback component.
2) When noise is output during playback or skip operation
Before playing back the DTS-CD, display the Option menu
after selecting the input source and set "Decoder Mode" to
"DTS" (page 48).
This unit has a SCENE function that allows you to change
input sources and sound field programs with one key. Four
scenes are available for different usages, such as playing
movies or music. The following input sources and sound
field programs are provided as the initial factory settings.
Keys Input source Sound field program
BD/DVD HDMI l Straight
TV AV 1 Straight
CD AV 3 Straight
RADIO
TUNER 7ch Enhancer
• When this unit is on standby, you can turn on this unit by pressing
@SCENE (or _SCENE).
• If you connect a Yamaha DVD/CD player that has the capability
of the
SCENE control signals to the REMOTE OUT jack of this unit, you can
start playback on the player by using the SCENE lunction.
Selecting a SCENE
Press @SCENE (or _SCENE).
_%,;
• You can also select a SCENE from the GU1 screen/page 23).
22
En