Function Setup; Hdmi Auto Lipsync; Manual Delay; Hdmi Control - Yamaha AV RECEIVER RX-V1065 Owner's Manual

Max
Outputs sound without adjusting the
dynamic range of the input signals.
• Lipsync
Adjusts delay between vide() output and audio output.
HDMI Auto kipsync
Choices: Oft _:, On
Automatically adjusts output timing of audio and video
signals when a TV that supports an automatic lip-sync
function is connected to this unit.
Off Select this when the connected TV does not
support the automatic lip-sync function or
you do not use the automatic lip-sync
function. Set the correction time in "Manual
Delay".
On Select this when the connected TV supports
the automatic lip-sync function. Fine adjust
the correction time in "Auto Delay".
Auto Delay
Adjustable range: 0'_ to 240ms
(I Ills step)
Fine adjust the correction time when "HDMI Auto
Lipsync" is set to "On". The actual correction time is
displayed under in "Auto Delay" field and an offset time
set by the user in "Offset" field.
Manual Delay
Adjustable range: 0_ to 240ms (I ms step)
Manually fine adjusts the correction time. Select this when
the connected TV does not support the automatic lipsync
function or you set "HDMI Auto Lipsync" to "OFF'.
You can set various items for HDMI and display.
• Standby Through
Choices: On, OfP _
Selects on or off of output of HDMI signals input from the
HDMI 1-4 jacks to the HDMI OUT jack when this unit is
on standby. When this parameter is set to "On", this unit
output signals input from the HDMI 1-4 jacks to the video
monitor even when this unit is on standby.
On Outputs the HDMI signals to the HDMI OUT
jack.
Off Not output the HDMI signals to the HDMI
OUT jack.
-4'--
• This parameter is not available when "HDMI Control" is set to "On".
• To enables HDMI signal standby-through output, any one of the input
sources connected to the HDMI 1=4 jacks must be selected befk_re
switching to standby.
• When "Standby Through" is set to "On", the (_HDMI THROUGH
indicator lights up. In this state, this unit consumes up to 3 watts of powel"
even nn standby.
• Audio Output
Choices: Amplifier_% TV, Amplifier + TV
Selects this unit or a component connected to the HDMI
OUT jack of this unit for reproducing sound signals input
from the HDMI 1-4 jacks.
Amplifier
TV
Amplifier +
TV
Outputs HDMI sound signals form the
speakers connected to this unit.
Outputs HDMI sound signals from the
speakers of a TV connected to this unit.
Sound output from the speakers connected to
this unit is muted.
Outputs HDMI sound signals from the
speakers connected to this unit and the
speakers of a TV connected to this unit.
HDMI
You can set items for HDMI.
• HDMI Control
Choices: On, OfP _
Selects on or off of the HDMI control function when a
component that supports the HDMI control function is
connected with this unit. When this parameter is set to
"On", this unit output signals input from the HDMI 1-4
jacks to the video monitor even when this unit is on
standby.
On Enables the HDMI control function.
Off Disables the HDMI control function.
-4'--
• Tbe _)HDMI THROUGH
indicator lights up in the fnllowing cases
while this unit is on standby.
- when the HDMI control fnnction is nn
- when the HDMI signal standby-through function is currently working
• When "HDMI Control" is set to "On'. this unit consumes 1 to 3 watts of
power depending on a condition nf an HDMI signal passing through this
unit.
• Signal lormats of audio and visual signals output fl'om this unit to the TV
vary depending on specifications of the monitor.
-4'--
• This parameter is not available when "HDMI Control" is set to "On".
• Resolution
Choices: Through_:, 4 80p, 720p, I080i, I080p
Upscales the resolution of HDMI output that is converted
from analog video input signals and output from the
HDMI OUT jack.
• Resolution of the HDMI output converted fl'om 720p nr 1080i analog
viden signals cannot be upscaled.
• When a vide<) monitor is connected to the HDMI OUT iack of this unit,
this unit automatically detects a resolution that the monitor supports. An
asterisk (":) appears nu the left of the detected resolution.
• If this unit cannot detect the resolution that the monitor supports, set
"MON.CHK" in the advanced setup menu to "SKIP" (page 64) and try
again.
58 En