Connecting A Tv Monitor Or Projector; Outputting Tv Sounds From This Unit; To Connect An Hdmi Video Monitor; To Connect Component Video Monitor - Yamaha AV RECEIVER RX-V1065 Owner's Manual

|tlqllll:i"l(lqli_
According to the types of video input jacks available on your video monitor (such as a TV or projector), choose one of
the connection methods as shown below. When you connect video players such as a DVD player to this unit with an
HDMI connection, connect your video monitor to this unit with an HDMI connection.
• Make sure lhal lhis unil and oilier components are unplugged h'om the AC wall outlets.
TV, or projector
Outputting TV sounds from this unit
To output sound of a TV from this unit, make connection
between one of the AV 1-6 jacks of this unit and an audio
output jack of the TV.
If the TV supports an optical digital output, we
recommend that you use the AV 1 jack. Connecting to the
AV 1 jack allows you to switch an input source to the AV 1
jack with a just a single key operation using the SCENE
function (page 22).
TV
• To connect an HDMI video monitor
Jacks on components Jacks on this unit
@ HDMI input HDMI OUT
• This unit supports the HDMI control lhnctiun (page 46). If your TV
supports the HDMI control function, you can control this unit with the
remote control of yotu" TV.
• To connect component video monitor
Jacks on components Jacks on this unit
@ Component video output MONITOR OUT
(COMPONENT VIDEO)
• To connect composite video monitor
Jacks on components Jacks on this unit
(_) Video input (composite) MONITOR OUT (VIDEO)
14 En