Yamaha AV RECEIVER RX-V1065 Owner's Manual page 51

E_ii_[O_i_[_[m]_l[m]_E##[_]_tm;j_,[_1_]_f<_m]_d_I O_]_i[m]_m##[_]_
Decoder Mode
Input source: HDMII-4, AVI-4
Choices: Auto*, DTS
Selects DTS digital audio signals for reproduction.
Auto
DTS
Automatically selects audio input signals.
Selects DTS signals only. Other input signals
are not reproduced.
Extended Surround
Input source: HDMII-4, AVI-4
Choices:
Auto*, PLIlxMovie,PLllxMusic,EX/ES,Off
Selects whether to reproduce multi-channel input signals
in 6.1 - or 7.1 -channel when surround back speakers are
used.
Auto
PLIIx
Movie
PLIIx
Music
EX/ES
Off
Automatically selects the most suitable
decoder according to whether a flag for
reproducing surround back channel is present,
and reproduces the signals in 6.1 - or 7.1 -
channel.
Always reproduces signals in 6.1- or 7.1-
channel using the PLIIxMovie decoder
whether or not surround back channel signals
are contained. You can select this parameter
when two surround back speakers are
connected.
Always reproduces signals in 6.1- or 7.1-
channel using the PLIIxMusic decoder whether
or not surround back channel signals are
contained. You can select this parameter when
one or two surround back speakers are
connected.
Automatically selects the most suitable
decoder for input signals whether or not the
flag for reproducing surround back channel is
present, and always reproduces signals in 6.1 -
channel.
Always reproduces original signals whether or
not the flag for reproducing surround back
channel is present.
Signal Info
Input source: HDMII-4, AVI-4, USB
Displays information on audio and video signals on the
GUI screen and front panel display. You can change items
to be displayed using [_)]Cursor/_ / V.
• Audio information
Format
Format of digital audio signals.
Channel
The number of input signal channels
(front/surround/LFE).
For example, if input signal channels are
3 front channels, 2 surrounds and LFE,
"31210.1" is displayed.
If a channel that cannot be expressed as
the above, a total number of channels
such as "5.1ch" may be displayed.
Sampling
The sampling frequency per second in
Frequency
analog-to-digital conversion.
Bitrate
The bit rate of input signal per second.
• "No Signal" is displayed when no signals are input and "--" is displayed
when signals that this unit cannot recognize are input.
• The bit rate may vary during playback.
• Video information
Video In
Video Out
Message
Format and resolution of video input
signal.
Format and resolution of video output
signal.
Error messages about HDMI signals and
HDMI components. See the I_llowing I_r
details of the error messages.
• HDMI error message
(appears only when an error has occurred)
HDCP Error
HDCP authentication failed.
Device Over
The number of HDMI components
connected is over the limit.
Out of Res.
The connected monitor is not compatible
with the video input signal.
Audio Mode
Input source: TUNER
Choices: Auto*, Mouo
Sets FM (or HD Radio) broadcasting receMng mode.
Auto
Mono
Receives in stereo mode by priority.
Receives in monaural mode. You can get a
better reception in monaural mode.
• (U.S.A. model nnly)
Select "Auto" to time into HD Radio statinns. When "Mono" is selected.
you can ttme into analng statinns only.
Auto Preset
Input source: TUNER
Automatically detects FM radio stations and registers
them as preset stations (page 29).
-"4"-
• (U.S.A. model only)
Automatically detects FM and AM HD Radio stations and analog FM
radio stations and registers them as preset stations.
Clear Preset
Input source: TUNER, XM, SIRIUS
Clears preset station (TUNER: page 30, XM: page 35,
SIRIUS: page 39).
Parental Lock
Input source: SIRIUS
Set the Parental Lock (page 40).
48 E_